User`s manual

322
• Even if ASCII-BIN conversion is "enabled," it is possible to transmit data without converting the data in any
user frame portion or buffer memory transmission area. When sending data without ASCII-BIN
conversion, specify the user frame No. using the following method.
• Specify the number obtained by adding 4000H to the registered user frame No.
(c) When sending data in the sections designated in 4001H to 44AFH, C000H to C01FH,
the additional codes by transmission transparent code designation will not be
added. ( Page 299, Section 12.3)
(2) The processing steps taken by the Q series C24 when communicating with
ASCII-BIN conversion and transparent code designation enabled are explained
in Page 299, Section 12.3.
• Transmission/reception in arbitrary formats
• Transmission/reception using user frames
User frame No. to be sent Designated No. when transmitting without ASCII-BIN conversion
1H to 3E7H (1 to 999) 4001H to 43E7H (16385 to 17383)
3E8H to 4AFH (1000 to 1199) 43E8H to 44AFH (17384 to 17583)
8000H to 801FH (-32768 to -32737) C000H to C01FH (-16384 to -16353)
b15 b14 b0b13 to
Number of frames
0: Conversion enabled 1: Conversion disabled
0: Frame registered in Flash ROM 1: Frame registered in buffer memory