User`s manual
272
(b) When the first frame is not specified
In the example, the following three combinations are registered for the receive user frame.
[Setting conditions]
[Setting value]
User frame
User frame receive format
designation
Exclusive format-1 received
data count
Remarks
1st
combination
(Last frame only)
Format-0
The received data count
becomes valid.
2nd
combination
(Last frame only)
3rd
combination
(Last frame only)
Setting item Setting value Remarks
Received data count designation 1FFH For Format-0
Receive complete code designation 00H
Designate any received
complete code.
Receive user frame designation
User frame use enable/disable designation
Enable Always specify "Enable".
Receive user frame designation
First frame No. designation
1st 0H
0H: No designation
2nd 0H
3rd 0H
4th 0H
Receive user frame designation
Last frame No. designation
1st 41DH 0H: No designation
1H or higher: There is a
designation.
In this setting, only three
combinations become
valid.
2nd 41EH
3rd 41FH
4th 0H
User frame receive format designation
1st Format-0
Everything is set to Format-
0 since the first frame is not
designated.
2nd Format-0
3rd Format-0
4th Format-0
Exclusive format-1 received data count
designation
1st 0H
Setting value for Format-1.
This setting is not required
since everything is set to
Format-0.
2nd 0H
3rd 0H
4th 0H