User`s manual

182
P6
P3
P2
Set the telephone number
Set the external line dialing number (0)
Set the line type (tone)
Set the message
Set the message length
Write the data for connection
Modem initialization processing subroutine
Initialization request signal is set
Initialization request execution flag is set
Notification processing subroutine
Notification execution flag is set
Data registration processing for connection
subroutine
Set the number of bytes of the registration
data
Clear the data storage device for connection
Set the pager receiver designation
(Notification is executed)
Set the space to the remainder of
the telephone number designation area
Set the waiting time for the message
transmission
(Data No. 8002H)
(Registration to buffer memory)
Data registration complete flag
for connection is set
Notification-issued request signal is set
(Initial status)
When the initialization complete signal ON,
the initialization complete flag is set
and the request signal is reset
When the initialization/connection abnormal
complete signal ON, the error code is read
and the request signal is reset
Notification-issued request signal is reset
(Issue request)
When the notification normal complete
signal ON, the notification complete flag is
set and the request signal is set (Initial status)
When the notification abnormal complete
signal ON, the error code is read
and the request signal is set (Initial status)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•