User`s manual

125
CHAPTER 3 COMMUNICATIONS BY THE MODEM FUNCTION
3
3.3 Specifications
When the number of times a remote password mismatch occurred exceeds the notification accumulated
count setting value during the remote password unlock processing in communication using MC protocol
with the Q series C24 CH1 side interface used.
Access enabled flag is turned ON
CH1 side ERR occurrence is detected
Read the CH1-side error code
Modem disconnection completed
The modem initialization normal completion
flag is set
The modem initialization request signal is
reset
The modem initialization request signal is
reset
The unlock processing accumulated count is
cleared
An instruction from the user resets the flag
The modem initialization ERR occurrence
flag is set
The modem initialization data setting flag is
set
Register initialization data for "No automatic
receive" to the buffer memory
If the error code indicates that
the accumulated count of remote password
mismatch is exceeded, the modem
disconnect request signal is set
When the modem disconnection completed
signal turns OFF, the No. for the modem
initialization data (for "No automatic receive")
is specified and initialization requested
Error code is read if the modem initialization
completes abnormally
The modem initialization processing normal
completion flag is set