User`s manual

110
(2) Details of the buffer memory (for modern function)
(a) Modem connection channel designation area (address 46 (2EH))
The interface on the Q series C24 side to which a modem/TA is connected is designated.
(b) Notification execution designation area (address 47 (2FH))
Whether or not to perform notification (message transmission) to the pager receiver during the fall of the
notification-issued request signal Y14 is designated.
(c) Number of connection retries designation area (address 48 (30H))
• Designates the number of retries for the notification/connection request when the connection could not be
made to the partner device by the notification request/connection request.
• The default value is recommended to use for the number of connection retries.
(d) Connection retry interval designation area (address 49 (31H))
• Designates the interval time of the retry processing for the notification/connection request when the
connection could not be made to the partner device by the notification request/connection request.
• The default value is recommended to use for the connection retry interval.
(e) Initialization/connection timeout time designation area (address 50 (32H))
• The following wait times are designated.
• Wait time until the modem/TA initialization is complete.
• Wait time per wait when the connection could not be made to the destination by the notification/connection
request.
• The default value is recommended to use for the initialization/connection retry timeout.
*1
*1 Shown below is the relationship of the number of connection retries designation, connection retry interval designation
and the time for initialization/connection timeout time designation used for the notification/connection request to the
partner device.
• Number of connection retries: 3 times
• Connection retry interval: 180s
• Initialization/connection retry timeout: 60s
(f) Number of initialization retries designation area (address 51 (33H))
The number of retries when the initialization per the initialization request to the modem on to the Q series C24
side has failed.
X16
Y14
X1E
Notification
60 s 180 s
(1st retry)
Notification abnormal
completion signal
Notification-issued
request signal
Q series C24 ready
signal
Notification
Notification Notification
(2nd retry) (3rd retry)
60 s 60 s 60 s180 s180 s