User`s manual

107
CHAPTER 3 COMMUNICATIONS BY THE MODEM FUNCTION
3
3.3 Specifications
553 (229H)
Notification status
confirmation
*2*3
Number of notification executions
0: Not executed, 1 or more: Number of executions
0R
554 (22AH)
Data
storage
area 1
Notification execution data number
0: No notification execution
BB8H or more: Notification executed
(Notification executions number)
R
555 to 557 (22BH to 22DH) System area (Use prohibited) 
:: 0
570 (23AH)
Data
storage
area 5
Notification execution data number
0: No notification execution
BB8H or more: Notification executed
(Notification executions number)
0
R
571 to 573 (23BH to 23DH) System area (Use prohibited) 
574 to 590 (23EH to 24EH) (Use prohibited) System area
3072 to 6911 (C00H to 1AFFH) For user
User free area (3840 words)
• Application is determined by the user.
0RW
6912 to 6952 (1B00H to 1B28H)
(For registration No. 8001H)
For user
registration
*3
User registration area (Registration No. 8001H to 801FH)
The user registration area has the following combined uses,
with data written by the user according to the purpose of use
by the TO instruction, etc.
See each explanation item concerning the configuration of
each area, the data written, etc.
0RW

8142 to 8182 (1FCEH to 1FF6H)
(For registration No. 801FH)
*3
If data communications is being carried out by user
registration frame
• User frame ( Page 220, CHAPTER 9)
If data communications is being carried out by the modem
function
• Initialization Data ( Page 134, Section 3.4.3)
• Connection Data ( Page 139, Section 3.4.4)
0RW
8183 to 8191 (1FF7H to 1FFFH) (Use prohibited) System area
8192 (2000H)
System
designation
Flash ROM writing allow/prohibit designation
0: Write prohibited, 1: Write allowed
0RW
8193 (2001H)
For callback
function
*3
Callback function designation
0H: Auto
1H: Callback connection (during fixed) (Setting 4)
3H: Callback connection (during designated number) (Setting
5)
7H: Callback connection (during max. designated number is
10)
(Setting 6)
9H: Auto/Callback connection (during fixed) (Setting 1)
BH: Auto/Callback connection (during designated number)
(Setting 2)
FH: Auto/Callback connection (during max. designated
number is 10) (Setting 3)
0
RW 
8194 (2002H)
Callback denial notification accumulated count designation
0H: Not specified
1H to FFFFH: Notification accumulated number count
1
8195 to 8198 (2003H to 2006H) (Use prohibited) System area
Address Dec. (Hex.)
Application Name
Default
value
Correspondence
protocol
CH1 CH2 MC Non Bi