User`s manual

100
5) If line connections from GX Developer are made with "Auto (Callback: during fixed/Callback: during
designated number)" as the connection system (Setting 1 (9H) to Setting 3 (FH))
• When accessing the QCPU from GX Developer, select whether to use the callback function to make line
connections or to make line connections without using the callback function.
• If the following is selected for the GX Developer connection system and line connections made, it is possible
to access the QCPU from the GX Developer by that method only on that occasion.
*3
●Auto (callback: during fixed)
●Auto (callback: during designated number)
*3 The procedure is the same as when accessing the QCPU by selecting "Auto" for the connection system and making line
connections.
• If line connections are made with the callback destination GX Developer limited to a maximum of 10 modules
set, (setting 3 (FH)), select "Auto (Callback: during designated number)" as the connection system and
specify the telephone No. The Q Series C24 checks the telephone No. received from the GX Developer side
and if it is registered in the Q Series C24, the line connection status is held and it becomes possible to
access the QCPU from GX Developer. If a telephone No. is received from GX Developer that is not
registered in the Q Series C24, the Q Series C24 disconnects the line.
• Data for checking the callback destination telephone No. by the Q Series C24 are registered in callback Data
No. 1 to 10. Set the data registered in callback data No. 1 to 10 in the "Modem function system setting"
screen.
If line connections are being made with "Auto (Callback: during designated number)" as the connection
system
2) Temporary line disconnection
3) Line connection
Modem
Modem
1) Line Connection
(Auto (callback: during designated number))
4) Access to the QCPU
Setting of callback function
designation settings by the
GX Configurator-SC
Selection of the
connection system
and line connections
5) Line disconnection
Processing by the callback function
Processing for the GX Developer
to access the QCPU
GX Developer
telephone No. 1)
Callback data No. 1 Telephone No. 1)
Callback data No. 2
Callback data No. 3
Callback data No. 10
Telephone No. 2)
Telephone No. 3)
Telephone No. 10)
Registration in the Q Series C24
to to