User`s manual

99
CHAPTER 3 COMMUNICATIONS BY THE MODEM FUNCTION
3
3.3 Specifications
4) If the maximum number of callback destination GX Developer is limited to 10 modules (Setting 3 (FH) or
Setting 6 (7H))
• Select GX Developer to be called back if the Q Series C24 limits the callback destination to a maximum of
10 modules.
• Specify the callback destination telephone No. when making line connection from the initial GX Developer
side.
• If the Q Series C24 checks the callback destination telephone No. received from the GX Developer side
and it is a telephone No. that is registered in the Q Series C24, callback is executed. If a telephone No.
that is not registered in the Q Series C24 is received from the GX Developer side, the Q Series C24
disconnects the line and does not execute callback.
• Data for checking the callback destination telephone No. by the Q Series C24 are registered in callback
Data No. 1 to 10. Set the data registered in callback data No. 1 to 10 in the "Modem function system
setting" screen.
If line connections are being made with "Callback connection (during designated number)" as the
connection system
*
Modem
GX Developer
telephone No. 1)
Modem
Line Connection
(Callback connection
(during designated number))
Modem
Callback
Input the telephone No. 1)
for the callback destination
telephone No. and make line
connections.
GX Developer
telephone No. 2)
Callback data No. 1
Telephone No. 1)
Callback data No. 2
Callback data No. 3
Callback data No. 10
Telephone No. 2)
Telephone No. 3)
Telephone No. 10)
Registration in the Q Series C24
Input the telephone No. 2)
for the callback destination
telephone No. and make line
connections.
Callback
Line Connection
(Callback connection
(during designated number))
to to
Set the Callback function designation by
the GX Configurator-SC.
Check the received telephone No. If it is
registered, make the line connection.