User`s manual

98
3) If it is being made possible to change the callback destination GX Developer (Setting 2 (BH) or Setting 5
(3H))
• Select the callback destination telephone No. if it is being specified at the time when line connections are
being made from the initial GX Developer side.
• The Q Series C24 calls back GX Developer with the callback destination telephone No. received from the
GX Developer side. At this time, the external line dialing, line types and the connection data set in the
following callback data No. 1 are used.
• If the callback destination is not specified when line connections are made from the initial GX Developer
side, the connection data set in the following callback data No. 1 are used to call back the GX Developer
side. At this time, the external line dialing, line types and telephone number in the connection data become
valid.
• Set callback data No. 1 in the "Modem function system settings" screen.
If line connections are being made with "Callback connection (during designated number)" as the
connection system
Modem
GX Developer
telephone No. 1)
Modem
Line Connection
(Callback connection
(during designated number))
Modem
Callback
Setting of callback function
designation settings by the
GX Configurator-SC
Input the telephone No. 1)
for the callback destination
telephone No. and make line
connections.
GX Developer
telephone No. n)
Callback data No. 1
Telephone No. 1)
Callback data No. 2
Callback data No. 3
Callback data No. 10
Telephone No. 2)
Telephone No. 3)
Telephone No. 10)
Registration in the Q Series C24
Input the telephone No. n)
for the callback destination
telephone No. and make line
connections.
Callback
Not used
Line Connection
(Callback connection
(during designated number))
to to