User`s manual

15
• To connect an extension cable to the QA6ADP, remove a sticker
on the IN side connector.
• To connect an extension cable to the OUT side connector of the
QA6ADP, remove the portion (lid) under the characters "OUT"
by tools such as a flathead screwdriver (5.5×75, 6×100).
POINT
When connecting the base unit of the previous stage and the QA6ADP with an extension
cable, be sure to connect the OUT side connector of the base unit of the previous stage and
the IN side connector of the QA6ADP.
If an extension cable is connected in the wrong way (IN

IN, OUT

OUT or IN

OUT), the
system will not operate normally.
IN side
Sticker
QA6ADP
Extension
base unit
Base cover
thin-walled part
Cutting one
Flathead screwdriver
QA6ADP
Extension base unit
OUT side
Base cover