User`s manual

13
(2) Removal of the QA6ADP
The following shows procedures for removing the QA6ADP from
the extension base unit.
screw
Adapter module
Adapter module
mounting screw
Mounting bracket fixing screw
mounting bracket
side connector
Place a base cover over the extension
base unit.
Mount a screw fixing the board of the
extension base unit at two parts on the left.
Remove a board fixing screw and an
adapter module mounting bracket of the
QA6ADP.
Remove the QA6ADP main body from the
extension base unit.
Remove the adapter module mounting
screws of the QA6ADP at two parts (top
and bottom).
Disconnect an extension cable form the
QA6ADP.
Completed
Board fixing screw
Adapter module
mounting
QA6ADP
guide
Mounting
Extension
base unit IN