User`s manual

11
4.2 Extension Stage Number Setting
Set the number of extension stages to both the QA6ADP and the
extension base unit.
The same stage number should be set to both the stage number setting
connector of the extension base unit and that of the QA6ADP.
(1) Extension stage number setting of the QA6ADP
The following describes how to set the number of extension stages
of the QA6ADP.
(2) Extension stage number setting of the extension base unit
POINT
Set any number of 1 to 7 which matches to the number of extension stages for the stage
number setting connector setting. If the stage number setting of the QA6ADP and that of the
extension base unit is different, the two or more settings are made to one stage, the same
stage number is duplicated, or no setting is made to the number of stages, incorrect input or
incorrect output will occur.
Extension stage number setting
1
st
stage 2
nd
stage 3
rd
stage 4
th
stage 5
th
stage 6
th
stage 7
th
stage
Stage number
setting connector
setting
Extension stage number setting
1
st
stage 2
nd
stage 3
rd
stage 4
th
stage 5
th
stage 6
th
stage 7
th
stage
Stage number
setting connector
setting
Insert a connector pin into the place of
the stage number selected from 1 to 7
of the connector (CON3) at bottom left
of the base unit.
Remove a base cover from the
extension base unit.
Stage number setting connecto
r
Completed