User`s manual

9
*2 This index indicates the degree to which conductive material is generated in
terms of the environment in which the equipment is used.
Pollution level 2 is when only non-conductive pollution occurs. A temporary
conductivity caused by condensing must be expected occasionally.
*3 Do not use or store the programmable controller in the environment when the
pressure is higher than the atmospheric pressure at sea level.
Otherwise, malfunction may result.
To use the programmable controller in high-pressure environment, please
contact your local Mitsubishi Repress entative.
3.2 Performance Specifications
This section describes performance specifications of the QA6ADP.
*1 The external dimensions show values in a status where the QA6ADP is
mounted on the extension base unit.
Item Specifications
5VDC internal current
consumption
110 mA
External dimensions *1
130 mm (5.11 inch) (H) × 73.5 mm (2.89 inch) (W)
× 74 (2.91 inch) mm (D)
Weight 0.2 kg
Adapter mounting screw (M3)
torque
0.36 to 0.48 N•m
Board fixing screw torque 0.61 to 0.82 N•m