User`s manual

7
*1 The dedicated instructions used in the QnA/A series program cannot be used
in the QCPU.
Replace the dedicated instructions with the FROM/TO instructions.
*2 There is restriction on the number of mountable modules.
*3 Using the A-A1S module conversion adapter enables to use modules
equivalent to the AnS module by the module shown in the table. For the
mountable modules, refer to A-A1S Module Conversion Adapter User's
Manual (IB-0800352).
*4 Only the multidrop link function can be used with the A1SJ71UC24-
R4+A1ADP.
*5 The interrupt module can use only one out of the QI60 (when mounted on the
Q3B, Q5B or Q6B), AI61, and AI61-S1.
*6 The normal operation of A series AC input module can be guaranteed only
when the base unit on which the A series power supply module is mounted
exists in the system.
Make sure that the following condition is satisfied when A series AC input
module is used.
Product name Model
No. of mountable
modules
Intelligent communication
module
AD51,
AD51-S3,
AD51H,
AD51E,
AD51E-S3,
AD51H-S3
6
Interrupt module AI61, AI61-S1 1 *5
 A series AC input module is mounted on the QA6B or QA6ADP+A6B.
 A series AC input module is mounted on the QA6ADP+A5B. However,
A series compatible extension base unit, QA6B or QA6ADP+A6B,
exists in the system.