User`s manual

5 - 22 5 - 22
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-DA)
(6) Fine adjustment of voltage output or current output
By clicking the + button or - button, the value of voltage output or current
output for the prepared adjustment value is finely adjusted.
(7) Write settings into module
Write the content set up by operations (3) to (6) into module by clicking the
Registration
button.
(8) Switch to the normal mode
After the setting is finished, click the Close button to close the offset/gain
setting screen, and set Switch 4 of the intelligent function module switch settings
to the normal mode. (Refer to Section 4.5.)
POINT
If an error code is displayed while performing the setting operation, the details and
measure of the error can be confirmed by clicking the ...
button to the right of the
error code display area. In addition, the error code can be cleared by clicking the
Error clear
button.