User`s manual

4 - 15 4 - 15
MELSEC-Q
4 SETUP AND PROCEDURES BEFORE OPERATION
(b) When switching the mode using the setting of the mode switching setting
(buffer memory addresses 158, 159: Un\G158, Un\G159) and operation
condition setting request (Y9)
Turns ON operation condition
setting request (Y9).
D/A conversion enable/disable
setting
1-second timer
Turns ON operation condition
setting request (Y9).
Sets 4144
H
to buffer memory
address 159.
Sets 964
H
to buffer memory
address 158.
Turns OFF operation condition
setting request (Y9)
Turns ON operation condition
setting request (Y9).
Sets 964
H
to buffer memory
address 159.
Sets 4144
H
to buffer memory
address 158.
Common program
Switches to offset/gain setting mode
Switches to normal mode
2
POINT
When switching the mode using the setting of the mode switching setting and
operating condition setting request, correct the initial setting program into the
program marked
2.
(c) When switching the mode by making intelligent function module switch
setting
Only the common program is necessary.