User`s manual

7 - 23 7 - 23
MELSEC-Q
7 ONLINE MODULE CHANGE
(c) Click the [Close] button to close the System monitor screen.
(d) On the pass data screen of GX Configurator-DA, set the prerecorded
values and make a pass data write request. (Refer to Section 5.6.5, 5.6.6.)
(e) Set digital values to the digital values (buffer memory addresses 1 to 8:
Un\G1 to 8) and turn Operating condition setting request (Y9) from OFF to
ON. Turn ON the output enable/disable flag (Y1 to Y8) of the used channel
to check whether proper conversion has been made or not.
(Be careful since analog outputs are provided actually.)