Specifications

Development
efficiency
enhancement
Development
efficiency
enhancement
Labor
reduction
Labor
reduction
Development
efficiency
enhancement
Development
efficiency
enhancement
Labor
reduction
Labor
reduction
Labor
reduction
Labor
reduction
Labor
reduction
Labor
reduction
9 10
MELSOFT Navigator
Integrated system management improves efficiency and thereby shortens development and maintenance time
Use the batch read function to download the
data of all PLC, motion controller, and GOT
with one operation. Consequently, It is not
necessary to start software for each device to
download these data.
Make use of templates to get started with multi-
CPU systems including motion controllers. The
hours for programming can be shortened,
because templates are pre-configured with
parameters and labels.
Set parameter settings for networks, I/O assignments,
and others, based on the information of the system
configuration diagram of MELSOFT Navigator, with
one operation. In addition, in the multi-CPU, once
parameters are set to a CPU module, the settings can
be reflected to other CPU modules easily.
Reflect the system configuration to the parameter setting
Batch read all project data
Motion system templates are available
It’s too much work to set
the parameters for every
single project...
The batch parameter
setting function makes
the work easier!
It’s hard to set the PLC CPU
and the motion CPU one by one...
Using a template, I can set
advanced motion controls
without trouble!
Starting the software for each
project and downloading them
is a lot of work...
I can execute the job
at a time, thanks to
the batch read function!
PLC project
Motion controller project
GOT project
Automatically applied to all projects at once
Automatically applied to all projects at once
Automatically download all selected
information in the system
Automatically download all selected
information in the system
From a specific command in the PLC
program, the motion programs related to the
command can be directly displayed. This
eliminates the need to open each project to
search for referenced programs.
Display related programs directly
I have to open multiple projects
and figure out which program this
command goes to and edit it...
Referring from the command,
the related program is
displayed automatically!
Displays the relevant programDisplays the relevant program
PLC project
Motion controller project
Start
Jump
Pre-configured template is available
Pre-configured template is available
MELSOFT MT Works2
MELSOFT GT Works3
MELSOFT MT Works2
MELSOFT GT Works3
MELSOFT GX Works2
MELSOFT GX Works2
MELSOFT Navigator