User`s manual

7 - 14 7 - 14
MELSEC-Q
7 ONLINE MODULE CHANGE
7.3.3 When user range setting is used and initial setting was made with GX Configurator-AD
(other system is available)
(1) Conversion disable
(a) Set the A/D conversion enable/disable setting (buffer memory address 0:
Un\G0) for all channel conversion disable and turn Operation Condition
Setting Request (Y9) from OFF to ON to stop conversion.
After confirming that conversion has stopped with the A/D conversion
completed flag (buffer memory address 10: Un\G10), turn off Operation
Condition Setting Request (Y9).