User`s manual

5 - 21 5 - 21
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-DA)
5.6.3 Confirmation of Conversion Characteristic
[Purpose of setting]
The converted value of digital-analog conversion can be confirmed according to
the tilt of the graph, based on the offset/gain setting.
[Startup procedure]
Monitor/test screen
Offset/gain setting
Conversion characteristic
[Setting screen]
[Explanation of items]
(1) Items displayed on the screen
I/O characteristic diagram: Displays the I/O conversion characteristic to the
prepared offset/gain setting.
(2) Setting details
Analog and Range setting
Analog: Select the output (voltage/current) when a digital value is
converted to an analog value.
Range setting: Select either "User range setting 2" or "User range setting
3. " However, if "Current" is selected for the "Analog" item,
only "User range setting 1" can be selected.
Offset/gain setting
Offset value: Enter an offset value to display the I/O characteristic
diagram.
Gain value: Enter a gain value to display the I/O characteristic diagram.