User`s manual

5 - 19 5 - 19
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-DA)
5.6.2 Offset/gain setting operation
Perform the offset/gain setting operation in the following sequence.
(1) Switch to the offset/gain setting screen
Perform the operation in Screen 5.6.1 to display the offset/gain setting screen.
At this point, a dialog box to confirm the transition of Q62DA-FG’s operation
mode (normal mode -> offset/gain setting mode) is displayed. Click the Yes
button to transit to the offset/gain setting mode.
(2) Specify a channel
Specify the target channel of offset setting or gain setting on the channel No.
combo box.
(3) Specify offset/gain setting
Specify either offset setting or gain setting on the channel specified on the
channel No. combo box using the radio button.
(4) Specify the user range setting
Specify a user range used for the offset/gain setting of each channel on the
combo box.
(5) Set up adjustment values
Set up an adjustment value of the offset value or gain value. Select "1," "10,"
"100," or "1000" on the combo box, however, you can also set up adjustment
values by entering a number (1 to 3000).