User`s manual

App - 7 App - 7
MELSEC-Q
APPENDIX
Appendix 1.3 OGSTOR
Restores the offset/gain values of the user range setting stored in the CPU to the
Q62DA-FG.
Usable devices
Internal device
(System, user)
MELSECNET/H
Direct J
\
Constant
Set data
Bit Word
File
register
Bit Word
Special
function
module
U \G
Index
register
Z
K, H S
Other
(S) — — ———
(D) — ———
Command
G.OGSTOR
Command
GP.OGSTOR
Un (S) (D)
Un (S) (D)
[Instruction
symbol]
[Execution
condition]
G.OGSTOR
GP.OGSTOR
Set data
Device Description Setting range Data type
Un Start I/O number of the module 0 to FE
H
Binary 16 bits
(S)
1
Start number of the device in which control data is stored.
Within the range of the
specified device
Device name
(D)
Device that is turned ON 1 scan on completion of dedicated
instruction processing.
(D) + 1 also turns ON at an abnormal completion.
Within the range of the
specified device
Bit
1 When executing the G.OGLOAD instruction, specify the device designated in (S).
Do not change the data read with the G.OGLOAD instruction.
If it is changed, normal operation cannot be guaranteed.
Control data
1
(1/2)
Device Item Set data Setting range Set by
(S) System area — — —
(S) + 1 Completion status
Stores the status when the instruction is
complete.
0 : Normal completion
Other than 0: Abnormal completion
(error code)
—System
(S) + 2 Pass data classification setting
The value set to pass data classification
setting (S)+2 using the G.OGLOAD instruction
is stored.
0
H
: Use range setting 1 specified
1
H
: Use range setting 2 specified
2
H
: Use range setting 3 specified
CH2 CH10
H
0
H
tob3 b0tob7 b4tob11 b8tob15 b12
—User
(S) + 3 System area — — —
(S) + 4
CH1 Industrial shipment settings
offset value (used for D/A)
——System
(S) + 5
CH1 Industrial shipment settings gain
value (used for D/A)
——System
(S) + 6
CH2 Industrial shipment settings
offset value (used for D/A)
——System
(S) + 7
CH2 Industrial shipment settings gain
value (used for D/A)
——System