User`s manual

App - 6 App - 6
MELSEC-Q
APPENDIX
(2) Operation error
In the following case, an error occurs and the corresponding error code is stored
into the completion status area (S)+1.
Error code Case resulting in operation error
164
The value set to the pass data classification setting (S)+2 is
outside the range.
(3) Program example
The following program is designed to read the offset/gain values of the Q62DA-
FG mounted in the position of I/O number X/Y0 to X/YF when M11 is turned ON.
Control data setting
Offset/gain value read
Performs processing at abnormal completion
Specifies user range setting1
Dedicated instruction
(GP.OGLOAD)