Specs

ManualsBrandsMitsubishi ManualsCooling30k BTU - P-Series Multi-Position Air Handler

Table Of Contents

Model Number

Indoor Unit PVA-A30AA7

Outdoor Unit

PUY-A30NHA7

PUY-A30NHA7-BS

Fan Motor Output W 86

Airflow Rate CFM 1,940

Refrigerant Control Electronic Expansion Valve

Heat Exchanger Type Cross fin

Sound Pressure Level, Cooling

dB(A) 47

Compressor Type Inverter-driven twin rotary

Compressor Model SNB172FWHM1

Compressor Rated Load Amps A 7

Compressor Locked Rotor Amps A 11

Compressor Oil Type // Charge oz. FV50S // 23

External Finish Color Ivory Munsell 3Y 7.8/1.1

Base Pan Heater n/a

Unit Dimensions

W: In. (mm) 37-13/32 (950)

D: In. (mm) 13 + 1-3/16 (330 + 30)

H: In. (mm) 37-1/8 (943)

Package Dimensions

W: In. 40-15/16

D: In. 17-11/16

H: In. 40-11/16

Unit Weight Lbs. (kg) 151 (68)

Package Weight Lbs. (kg) 176 (80)

Outdoor Unit Operating

Temperature Range

Cooling Intake Air Temp (Maximum / Minimum) °F 115 DB / -40* DB

Refrigerant

Type R410A

Charge Lbs, oz 7 lbs, 11 oz

Piping

Gas Pipe Size O.D. (Flared) In.(mm) 5/8 (15.88)

Liquid Pipe Size O.D. (Flared) In.(mm) 3/8 (9.52)

Maximum Piping Length Ft. (m) 225 (69)

Maximum Height Difference Ft. (m) 100 (30)

Maximum Number of Bends 15

Notes

AHRI Rated Conditions (Rated data is

determined at a fixed compressor

speed)

Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB

*Wind baffles required to operate below 23F DB in cooling mode. For PUY models, wind baffles can be utilized to extend the cooling operation range to

-40F. Please refer to the wind baffle submittals to determine which baffles are required to meet the desired operation range.

**System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

SEACOAST PROTECTION

• External Outer Panel: Phosphate coating + Acrylic-Enamel coating

• Fan Motor Support: Epoxy resin coating (at edge face)

• Separator Assembly; Valve Bed: Epoxy resin coating (at edge face)

• “Blue Fin” treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants.

SPECIFICATIONS: PVA-A30AA7 & PUY-A30NHA7(-BS)