User manual

EN-7
3. Main screen
 Group Name Group of the projector can be selected. When you select “All”, all the registered
projectors are displayed. Newly created group(s) are added to the list. When you
select your choice of group, all projectors that belong to the selected group are
displayed.
 Status tag Property and status of the projector can be indicated. When clicking each tag button
(excepttheMACaddress),thelistcanberearranged(sorted).
 Projector list display column
List of the projector which belongs to the selected group can be displayed. Status of
the projector can also be displayed. The display color changes as follows depending
ontheconditionoftheprojector:
Black: Innormalcondition
Red: Inabnormalcondition( Check the abnormal condition by ProjectorView.
When the communication fails, see “11.1. Troubleshooting.”)
Black(yellowbackground): Warningaboutthelamplifetime
White(redbackground): Thecommunicationwiththeprojectormonitoredbythetheftdetectorhas
been disrupted. ( Check the condition. There is a possibility of theft.)
Gray: Incommunicationinoperablecondition
 Error Message Error messages detected in communicating with the projector can be displayed.
 Operation status display column
Operation status of “ProjectorView Global+” can be indicated. Operation status
during communication processing by remote-controlling and schedule can be
indicated.