User manual

EN-6
 Menu bar
Configuration Youcanspecifythefollowingsettings:
AddNewGroup: Youcancreateanewgroup.
EditScheduleSetting: Youcaneditschedulesettingssetforexistinggroups.
SearchProjector: Automaticallysearchesavailableprojectors.
AssignIP: YoucancongureIPsettingsoftheprojector.
EditProjectorSetting: Youcaneditprojectorsettings.
EditE-mailSetting: YoucancongureE-mailsettingsusedforthisapplication.
SearchProjectorSetting: Youcanspecifyasearchrangeforcommunicationwiththeprojectorviaa
router.
SystemConguration: Youcanconguresystemsettingsofthisapplication.
Help The version information is displayed.
 Tool bar
ProjectorView YoucancontroleachprojectorseparatelyusingaWebbrowser.Incaseofanerrorin
the projector, the details of the error are displayed. For details, see page 20.
Telnet YoucanmakevarioussettingsusingTelnet.(Telnetenabledprojectorsonly)
 Youcansetthepassword,ProjectorViewdisplaylanguage,LANcontrol,andPJLink
certification. For details, see page 28.
Visual PA2 Youcandisplayalineofanytextontheprojectorscreen(VisualPA2enabled
projectors only). For details, see page 25.
Remote Controller RemoteControllerwindowcanbedisplayedtooperatetheprojector.Youcanturn
on/offthepower,andselecttheinputsource.
Refresh Status The current status of Power, Input Source, AV Mute, and Lamp Time (Low) of the
projectors being displayed in the projector list can be reacquired. The status of Input
SourceandAVMutewillnotbeobtainedunderthefollowingconditions:
• whentheprojectorispoweredoff
• duringwarm-uporcool-down.
Select All Allprojectorscurrentlydisplayedontheprojectorlistcanbesettoselected/non
selected state.
Exit Youcanexit“ProjectorViewGlobal+”.However,youcannotexittheapplication
during the automatic projector search and the projector status refreshing. Even
duringtheprojectorstatusacquisition,youcanexittheapplicationforcefullyby
clicking the button at the upper right corner of the main screen. In this case,
Windows warning message is displayed.
3. Main screen

 



