User manual

EN-2
1.1. Preparing to use network features
This projector is equipped with the network function to control and monitor the projector’s operations and to
send e-mail notification.
Before using the network function, perform the following three preparation steps.
• InstallingtheProjectorViewGlobal+
• AssigningtheprojectorIPaddress
• ConguringsettingssuchasPASSWORD,E-mailSetting,Language,andPJLinkcerticationSettingby
running Telnet (Telnet enabled projectors only) or using ProjectorView
TheprojectorIPaddress,password,andPJLinkcerticationcanbeconguredontheprojectormainscreen.For
more information, see the section describing network settings provided in the projector's User Manual.
1.2. Functions and features
ProjectorView Global+
• 200unitsofprojectorscanberemote-controlledatthemaximum.
• SettingssuchastheIPaddressoftheprojectorcanbecongured.
• Youcanregistermultipleprojectorsinagroupandcontrolthemcollectively.
• Variousconditionsofconnectedprojectorscanbemonitored.
• ScheduleofthepowersupplyON/OFFcanbeseteverygroup.
• ScheduleofthepowersupplyON/OFFcanbeseteveryday.
• Whenthecommunicationwiththeprojectormonitoredbythetheftdetectorisdisrupted,warningE-mailis
issued to the designated address.
• Messagecanbedisplayedonthescreenoftheoperatingprojector.(VisualPA2enabledprojectorsonly)
• Theprojectoriscapableofreadingaloudon-screenmessages.(TextSpeechenabledprojectorsonly)
ProjectorView
• EachprojectorcanbecontrolledseparatelyusingaWebbrowser.
• Whenanerrororwarningoccurswiththeprojector,warningE-mailisissuedtothedesignatedaddress.
PJLink
•TheproductsupportstheindustrystandardprotocolPJLinkforprojectorcontrol.
1.3. Operation environment
• SupportedOS
Windows XP, Windows Vista and Windows 7 (Operation of the projector isn’t guaranteed in a 64-bit version of
any operating system.)
• CPU
Higher than the minimum specifications for the above operating systems to work
• Memory
More than the minimum specifications for the above operating systems to work
• FreeHDDspace
32 MB or more (recommended)
• Webbrowser(WhenusingProjectorView)
 InternetExplorerVer.7.0,Ver.8.0,andVer.9.0(recommended)
 (JavaPlug-in*
1
mustbeinstalledandJavaScriptmustbeenabled.)
*
1
 InstallingJavaPlug-in:
(1) DownloadJRE7fromtheJAVAdownloadcenterontheOracleWebsite
 (http://java.sun.com/javase/downloads/index.jsp).
 (WhenthisleURLisnotavalidlocation,searchfor“JRE7download”usingasearchengineandaccess
the download site.)
(2)Executethedownloadedle.
(3) After installation is complete, disable the cache settings as following procedures.
1. Select[Start]-[ControlPanel]-[Java].
2. Select [General] tab and click [Settings...].
3. Click [Delete Files...].
4. Click [OK] in the Delete Temporary Files window.
1. Introduction