User manual

MITSUBISHI MGS SERIES
DIESEL GENERATOR SET
MGS1000HV
V-12, 4 stroke-cycle water-cooled, turbocharged and aftercooled
ENGINE SPECIFICATIONS & TECHNICAL DATA
Bore
mm
150
Stroke
mm
175
Displacement
L
37.1
Piston speed
m/sec.
10.5
Compression ratio
14
Lubricating oil capacity
L
200
Coolant capacity without radiator
L
100
Coolant pump external resistance
m water
5.0
Coolant pump flow rate
L/min
1450
Cooling fan airflow rate
m
3
/min
1800
Cooling fan air flow restriction
kPa
0.1
Ambient air temperature
°C
40
Allowable exhaust back pressure
kPa
6.0
Exhaust flange size (internal diameter)
mm
200
ENGINE OPERATING DATA
Gross Engine Power*
kWm
1136
Brake mean effective pressure
MPa
2.1
Regenerative absorption
kW
108
Noise Level at 1 m
dB(A)
113
(excluding: intake, exhaust & fan)
Fuel consumption load 100%*
L/hr.
290
Fuel consumption load 75%*
L/hr.
214
Combustion air inlet flow rate
m
3
/min
100
Exhaust gas flow rate
m
3
/min
262
Exhaust gas temperature
°C
510
Heat rejection to coolant
kW
722
Heat rejection to exhaust
kW
926
Heat rejection to atmosphere from engine
kW
87
Heat rejection to atmosphere from generator
kW
53
* WITH FAN basis.
Deration for engine
Altitude: 2.5% per 300m (1000ft) above 1,500m
Temperature: 2% per 5℃ (9° F) above 40℃
ENGINE STANDARD EQUIPMENT
Aftercooler
Turbocharger filter
Structure steel base
Crankcase breather
Charging alternator
Lubricating oil cooler
Fuel filters, full flow paper element
Fuel transfer pump, gear driven, plunger type
Electronic type governor
Jacket water heater
Jacket water pump, gear driven
Lubricating oil filter, full flow paper element
Lubricating oil pump, gear driven
Exhaust dry manifold
Radiator, blower fan, fan drive
Manual shutoff
24V DC electric starting motor
STAND-BY
1060 kW
MGS SERIES DIESEL ENGINE: MITSUBISHI S12H-PTA-S