Service manual

13
OUTLINES AND DIMENSIONS5
Unit : mm
Ceiling hole
Suspension bolt pitch
Suspension bolt M10 or
Air intake hole
Air outlet hole
Air intake grill
690~710 25~3525~35
640 660 466 460
66 35
760
117 117
117
435
13545
117
Ceiling hole
Suspension bolt pitch
Suspension bolt lower edge
Air outlet hole
Air outlet hole
690~710
25~35
25~35
65~80
760
460
466
6635
115
243
253
29330
54
+3
- 2
507
660
54
53
Terminal block for control
Terminal block for remote controller
Terminal block for power supply
Drain hole
Drain hole VP-25 connection
W3/8
Feeding hole (Drain pump)
Leave space of 10~15mm between the top surface of the unit and the ceiling slab.
Ceiling surface
4-Auto vanes
Intake grill opening/closing side
Vane motor
Decorative panel
Control wire entry
Refrigerant piping side electric wire entry side
Power line entry
41 25
Liquid pipe
Gas pipe
Optional high-efficiency hilter
NOTE1. For electrical parts box may be removed during servicing. When
connecting the power line and the control wire, provide enough length to the electric wires.
NOTE2. When installing the optional high-efficiency filter, the dimension
between the transom and ceiling shall be more than 440mm. Also,when installing the optional casement, the dimension between the transom and ceiling shall be more than 440m. (The optional highefficiency filter can also be installed.)
1 2
Refrigerant pipe {9.52
Flared connection 3/8F
Refrigerant pipe {15.88
Flared connection 5/8F
1.6/2/2.5KK
1. INDOOR UNIT
PLH-1.6KKHB.UK
PLH-2KKHB.UK
PLH-2.5KKHB.UK