Air-Conditioners Indoor unit PLA-RP.BA OPERATION MANUAL FOR USER For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit. 中文 RG79D251H01_EN_0227.
Contents 1. 2. 3. 4. 5. 6. Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Parts Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Screen Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting the Day of the Week and Time . . . . . . . . . . . . . . . . 5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Parts Names Wired Remote-Controller “Sensor” indication Display Section For purposes of this explanation, all parts of the display are shown. During actual operation, only the relevant items will be displayed. Identifies the current operation Displayed when the remote controller sensor is used. Day-of-Week Shows the current day of the week. Time/Timer Display “Locked” indicator Shows the current time, unless the simple or Auto Off timer is set.
2. Parts Names Wireless Remote-Controller Transmission area Transmission indicator Remote controller display Timer indicator *For explanation purposes, all of the items that appear in the display are shown. *All items are displayed when the Reset button is pressed.
3. Screen Configuration Function Selection of remote controller Set Day/Time TIME SUN Standard Control Screens ˚F˚C ˚C OFF ON Timer Monitor Timer Setup SUN MON TUE WED THU FRI SAT MON TIMER OFF ˚F˚C WEEKLY WEEKLY For details on setting the language for the remote controller display, refer to section 8. Function Selection. The initial language setting is English.
5. Operation Press the ON/OFF button 1 again. • The ON lamp 1 and the display area go dark. Note: Even if you press the ON/OFF button immediately after shutting down the operation is progress, the air conditioner will not start for about three minutes. This is to prevent the internal components from being damaged. 5.2. Mode select Press the operation mode ( tion mode 2.
5. Operation < How to set the fixed up/down air direction (Only for wired remote controller) > Horizontal airflow Downward Note: This function cannot be set depending on the outdoor unit to be connected. • For PLA-RP . BA, only the particular outlet can be fixed to certain direction with the procedures below. Once fixed, only the set outlet is fixed every time air conditioner is turned on. (Other outlets follow UP/ DOWN air direction setting of remote controller.
5. Operation < Process for setting > [1] To turn off air conditioner and change the remote controller to "Fixed airflow direction mode" 1.Press ON/OFF button 1 to turn off the air conditioner. 2.Press Fan Speed button 2 and Filter button 3 for more than 2 seconds simultaneously and it becomes the fixed airflow direction mode after a while. [4] To cancel "Fixed airflow direction mode" 1.Press ON/OFF button 1 to cancel "Fixed airflow direction mode".
5. Operation How to find air conditioner No. Each air conditioner has its own refrigerant address No. and unit No. (Example below). To find air conditioner No. to set, refer to the procedures below. Air conditioner No. is found by its airflow direction with the unit No. changed one after the other. Refrigerant address No.”00” Unit No.”1” Refrigerant address No.”01” Unit No.”2” Unit No.”1” Unit No.”2” Remote controller As for this air conditioner, air conditioner No. is “Unit No.
6. Timer 6.1. For Wired Remote-controller You can use Function Selection of remote controller to select which of three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. Shows the time setting 5 SUN 6.1.1. Weekly Timer ON The weekly timer can be used to set up to eight operations for each day of the week.
6. Timer Press the Timer On/Off button 9 so that the “Timer Off” indication (at goes dark. 10 ) TIME SUN C C 10 WEEKLY 6.1.2. Simple Timer You can set the simple timer in any of three ways. • Start time only: The air conditioner starts when the set time has elapsed. • Stop time only: The air conditioner stops when the set time has elapsed. • Start & stop times: The air conditioner starts and stops at the respective elapsed times.
6. Timer Examples If ON and OFF times have both been set at the simple timer, operation and display are as indicated below. 3 Timer Setting 2 AFTER Example 1: Start the timer with ON time set earlier than OFF time ON Setting: 3 hours OFF Setting: 7 hours Hr ON AFTER At Timer Start SIMPLE Hr Display shows the timer’s ON setting (hours remaining to ON).
6. Timer 6.2. For Wireless Remote-controller 1 Press the AUTO STOP or AUTO START button (TIMER SET). • Time can be set while the following symbol is blinking. OFF timer : A is blinking. is blinking. ON timer : A h min 2 Use the and buttons to set the desired time. 3 Canceling the timer. AUTO STOP To cancel the OFF timer, press the button. To cancel the ON timer, press the AUTO START button. • It is possible to combine both OFF and ON timers.
7. Other Functions 7.2. Error Codes indication ERROR CODE ON/OFF Indoor Unit’s Refriger- Error Code ant Address If you have entered contact number to be called in the event of a problem, the screen displays this number. (You can set this up under Function Selection of remote controller. For information, refer to section 8.) ON lamp (Blinking) Indoor Unit No.
8. Function Selection [Function selection flowchart] Setting language (English) Normal display (Display when the air conditioner is not running) Hold down the button and press the Hold down the button and press the Remote controller function selection mode Item 1 Change Language button for 2 seconds. Press the operation mode button. Press the TIMER MENU button. Press the TIMER ON/OFF button. button for 2 seconds. Item 2 English Dot display Germany Spanish TEMP.
8. Function Selection [Detailed setting] [4]-1 CHANGE LANGUAGE setting The language that appears on the dot display can be selected. • Press the [ MENU] button G to change the language. 1 English (GB), 2 German (D), 3 Spanish (E), 4 Russian (RU), 5 Italian (I), 6 Chinese (CH), 7 French (F), 8 Japanese (JP) Refer to the dot display table. [4]-2 Function limit (1) Operation function limit setting (operation lock) • To switch the setting, press the [ ON/OFF] button D.
8.
9. Emergency Operation for Wireless Remote-controller When the remote controller cannot be used When the batteries of the remote controller run out or the remote controller malfunctions, the emergency operation can be done using the emergency buttons on the grille. A DEFROST/STAND BY lamp B Operation lamp C Emergency operation switch (heating) D Emergency operation switch (cooling) E Receiver Starting operation button D for more than 2 • To operate the cooling mode, press the seconds.
11. Trouble Shooting Having trouble? Air conditioner does not heat or cool well. When heating operation starts, warm air does not blow from the indoor unit soon. During heating mode, the air conditioner stops before the set room temperature is reached. Airflow direction changes during operation or airflow direction cannot be set. When the airflow direction is changed, the vanes always move up and down past the set position before finally stopping at the position.
11. Trouble Shooting Having trouble? Noise is louder than specifications. Here is the solution. (Unit is operating normally.) The indoor operation sound level is affected by the acoustics of the particular room as shown in the following table and will be higher than the noise specification, which was measured in anechoic room.
This product is designed and intended for use in the residential, commercial and light-industrial environment. The product at hand is based on the following EU regulations: • Low Voltage Directive 2006/95/EC • Electromagnetic Compatibility Directive 89/ 336/ EEC Please be sure to put the contact address/telephone number on this manual before handing it to the customer. HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN BH79D251H01 RG79D251H01_EN_0227.
