Indoor Service Manual

OPERATING PROCEDURE PHOTOS/FIGURES

14. Removing the heat exchanger

(1) Remove the drain pan. (Refer to procedure 10.)

(2) Remove the piping cover (tapping screw 4×10: 3

screws).

(3) Remove the coil plate (tapping screw 4×10: 2 screws).

(4) Remove the heat exchanger fixing screws (tapping

screw 4×10: 2 screws).

(5) Remove the coil support (tapping screw 4×10: 1 screw

each)

■

PLA-A12/18EA7:

coil support (See photo16.)

■ PLA-A24/30/36/42EA7: 3

coil supports (See photo17.)

(6) Remove the heat exchanger.

Photo 16

Photo 17

Coil support xing screw

Coil support

Heat exchanger xing screws

Piping cover

Coil plate

Heat exchanger

Coil support

xing screw

Coil support

Heat exchanger xing screws

Coil plate

Heat exchanger

Piping cover

OCH640D