Indoor Service Manual

OPERATING PROCEDURE PHOTOS/FIGURES

12. Removing the drain pump (DP)

(1) Remove the drain pan. (Refer to procedure 10.)

(2) Cut the hose band and remove the hose.

(3) Loosen the clamp of the drain pump.

(4) Remove the drain pump (tapping screw 4×10: 2 screws/2

hooks).

Photo 14

13. Removing the float switch (FS)

(1) Remove the drain pan. (Refer to procedure 10.)

(2) Loosen the clamp of the drain pump. (See Photo 14.)

(3) Remove the float switch (tapping screw 4×10: 1 screw/1

hook). (See Photo 15.)

Photo 15

Drain pump

Float switch

Clamp

Hose band

Float switch xing screw

Do not hold this oating part

when lifting; Doing so will cause

malfunction.

Drain pump base

xing screws

Float switch

OCH640D