User manual

EN-13
4. Projector registration
<Note>
• Ifyouwanttoconnectaprojectorviaarouterafterautomaticallydetectingit,youneedtospecifyasearch
range of IP addresses that includes the projector’s IP address in advance.
• NotethatadifferentIPaddressmaybeassignedeverytimeyoustarttheprojectors.Ifaconnectioncannot
beestablished,specifytheprojectorsearchrangeandexecute“SearchProjector”again.
• IfyouchangetheIPaddressintheprojectormenuaftertheprojectorshavebeendetected,execute“Search
Projector” again.
• IfseveralprojectorswiththesameIPaddressareregistered,deletetheoneswhicharenotconnectedtothe
network from “Edit Projector Setting”.
4.3. When changing the projector IP settings
YoucanchangetheprojectorIPsettings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Assign IP" from “Configuration” of the menu bar on the main screen.
• “AssignIP”windowisdisplayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually
assign an IP address, select [Manual] and enter values for IP Address, Subnet Mask, and
Default Gateway.
Item Description
DHCP ObtainanIPaddressviaaDHCPserver.
IP Address Enter an IP address.
Subnet Mask Enter the subnet mask.
Default Gateway Enter the default gateway address.
<Note>
• EvenwhenyouchangetheprojectorIPsettingsinthe“AssignIP”window,settingsofDHCPFunction,Start
IP Address, and End IP Address in the projector menu are not changed.
• AnerrordialogfortheftdetectionmaybedisplayedaftertheIPsettingshavebeenchanged.