User manual

EN-35
ENGLISH
Advanced features (continued)
An example of connecting the projector to peripherals
• When using an external hub or router, use a Category 5 straight cable. (A crossed cable can be used with some hubs and routers. See the
appropriate documentation for more information.)
• Don't touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged from your body, causing damage
to the projector.
Using the LAN Control Utility User Manual
The LAN Control Utility User Manual is prepared in the Portable Document Format (PDF) in the CD-ROM.
Opening the LAN Control Utility User Manual:
1. Load the CD-ROM into the CD-ROM drive.
2. Open CD-ROM "FD630U/FD630U-G".
3. Double-click on "MANUAL_LAN.HTML" within the CD-ROM. A language selection list for the LAN Control Utility User Manual will be displayed.
4. Move the mouse pointer to the desired language and click.
To LAN terminal
LAN cable (option)
(100BASE-TX or 10BASE-T
should be supported.)
Computer
External HUB
LAN cable (option)
(100BASE-TX or 10BASE-T should be supported.)
When STANDBY MODE is set to LOW, LAN connection is not available. To enable the LAN connection, set the STANDBY MODE to
STANDARD.