Air-Conditioners INDOOR UNIT For use with R410A GB PEH-8,10WYB OPERATION MANUAL I For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit. WT51207X01_h1_h4.
Remote controller-Button 1 TEMP.
Remote controller-Display A O L TIME SUN MON TUE WED THU FRI SAT Hr ON TIMER AFTER AFTER OFF ERROR CODE ˚F ˚C B ˚F ˚C C TEMP. ONLY 1Hr.
[Fig. A] Air Flow Filter 4 WT51207X01_illust.
1. Safety precautions Warning: The remote controller should be installed in such a way that children cannot play with it. 4) Drain hose Warning: Describes precautions that should be observed to avoid the risk of injury or death to the user. Caution: Describes precautions that should be observed to prevent damage to the unit. Symbols used in the illustrations : Indicates an action that must be avoided. Caution: Make sure that the drain hose is installed so that drainage can go ahead smoothly.
In case of failure When the air conditioner is not to be used for a long time Warning: • • • • Never remodel the air conditioner. Consult your dealer for any repair or service. Improper repair work can result in water leakage, electric shock, fire, etc. If the remote controller displays an error indication, the air conditioner does not run, or there is any abnormality, stop operation and contact your dealer. Leaving the unit as it is under such conditions can result in fire or failure.
To change room temperature Press the 1 [Set Temperature] Button and set the room temperature of your choice. Pressing or once changes the setting by 1 °C. If the pressing is continued, the setting continues to change by 1 °C. 2. When reaching room temperature of your choice Both the compressor and indoor fan stop. When stop continues for 10 minutes, the compressor and indoor fan are operated for 3 minutes to keep the humidity low. • Indoor temperature can be set within the following range.
5. Caring for the machine Always have filter maintenance performed by a service person. Before care-taking, turn the power supply OFF. How to clean • Clear dust away lightly or clean it up with a vacuum cleaner. In the case of severe staining, wash the filter in lukewarm water mixed with dissolved neutral detergent or water, and then rinse off the detergent completely. After washing, dry it and fix it back into place.
7. Installation, transferring works, and checking Regarding place for installation Consult with your dealer for details on installation and transferring the installation. • • Caution: Never install the air conditioner where there is a risk of leakage of flammable gas. If gas leaks and accumulates around the unit, fire can result.
GB E F E I NL P GR RU TR blank_3pages.
GB E F E NL P GR RU TR blank_3pages.
This product is designed and intended for use in the residential, commercial and light-industrial environment. Please be sure to put the contact address/telephone number on this manual before handing it to the customer. HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN WT51207X01 WT51207X01_h1_h4.
