Service Manual

25
OCH636B
MENU
ON
OFF
RETURN
SELECT
HOLD
F1 F2 F3 F4
Test run menu
Cursor
Service menu: MENU
Test run
Drain pump test run
1
Select "Service" from the Main menu, and press the [SELECT] button.
2
Select "Test run" with the F1 or F2 button, and press the
[
SELECT] button.
Select "Test run" with the
F1
or
F2
button, and press the [ SELECT] button.
F1 F2 F3 F4
Cool
Pipe
Auto
Switch disp.
Mode Fan
RemainTest run
Remain
Vane
Test run
F1 F2 F3 F4
MENU
ON
OFF
RETURN
SELECT
HOLD
Cool mode: Check the cold air blows out.
Heat mode: Check the heat blows out.
Press the F1
button to go through the operation modes in the order of "Cool
and Heat".
Check the auto vane with the F1
F2 buttons.
Press the [RETURN] button to return to “Test run operation”.
Press the [ON/OFF] button.
When the test run is completed, the “Test run menu” screen will appear.
The test run will automatically stop after 2 hours.
Test run operation
Auto vane check
Press the [SELECT] button and open the Vane setting screen.
Function buttons
F1 F2 F3 F4
MENU RETURN SELECT ON/OFF
10-2-1. Test run for wired remote controller <PAR-4xMAA ("x" represents 0 or later)>
Check the operation of the outdoor unit’s fan.
unem ecivreS
rosruC
: RETURNunem niaM
Test run
Input maintenance info.
Settings
Check
Others
F1 F2 F3 F4
MENU
ON
OFF
RETURN
SELECT
HOLD
F1 F2 F3 F4
MENU
ON
OFF
RETURN
SELECT
HOLD
F1 F2 F3 F4
MENU
ON
OFF
RETURN
SELECT
HOLD