Engineering Manual

17
NOTES : *1.Rating conditions (cooling)-Indoor : D.B. 26.7°C(80°F), W.B. 19.4°C(67°F) Outdoor : D.B. 35°C(95°F), W.B. 23.9°C(75°F)
(heating)-Indoor : D.B. 21.1°C(70°F), W.B. 15.6°C(60°F) Outdoor : D.B. 8.3°C(47°F), W.B. 6.1°C(43°F)
*2.Conditions (heating)-Indoor : D.B. 21.1°C(70°F), W.B. 15.6°C(60°F) Outdoor : D.B. -8.3°C(17°F), W.B. -9.4°C(15°F)
*3.Conditions (heating)-Indoor : D.B. 21.1°C(70°F), W.B. 15.6°C(60°F) Outdoor : D.B. -15°C(5°F), W.B. -15°C(5°F)
Operating range
Indoor intake air temperature
D.B. 32°C(90°F), W.B. 23°C(73°F)
Outdoor intake air temperature
D.B. 46°C(115°F)
Cooling
Heating
Maximum
* In case that the wind baffle is installed. (In case that the wind baffle is not installed, the minimum temperature will be -5°C(23°F)DB.)
*4. The factory setting of external static pressure is shown without <>.
*5. The values are measured at the factory setting of external static pressure.
D.B. -5°C(23°F)
D.B. -18°C(0°F)*
D.B. 21.1°C(70°F), W.B. 15°C(59°F)
D.B. -25°C(-13°F), W.B. -25°C(-13°F)
D.B. 19°C(66°F), W.B. 15°C(59°F)
D.B. 28°C(83°F)
D.B. 10°C(50°F)
Minimum
Maximum
Minimum
Model name Indoor unit PEAD-A30AA7 PEAD-A36AA7 PEAD-A42AA7
Outdoor unit PUZ-HA30NHA5 PUZ-HA36NHA5 PUZ-HA36NHA5
Cooling Max. Capacity Btu/h 30,000 36,000 42,000
Rated Capacity Btu/h 27,000 33,000 42,000
Min. Capacity Btu/h 18,000 18,000 19,000
Total Input W 2,160 2,640 4,200
EER Btu/h/W 12.5 12.5 10.0
SEER Btu/h/W 16.5 16.8 14.3
Moisture Removal Pints/h 8.9 7.3 9.0
SHF 0.67 0.76 0.76
*1 Power factor % 93.0 93.3 94.1
Heating Max. Capacity Btu/h 34,000 40,000 54,000
Rated Capacity Btu/h 32,000 38,000 48,000
Min. Capacity Btu/h 18,000 18,000 21,000
Total Input W 2,750 3,150 3,800
COP W/W 3.41 3.53 3.70
HSPF (IV/V) Btu/h/W 9.5/7.3 10.4/8.2 10.8/9.2
*1 Power factor % 94.1 93.8 93.3
Heating at 17°F
(-8.3°C)
Max. Capacity Btu/h 32,000 38,000 48,000
Total Input W 4,930 5,400 6,500
*2 COP W/W 1.90 2.06 2.16
Heating at 5°F
(-15°C)
Max. Capacity Btu/h 32,000 38,000 48,000
Total Input W 5,420 6,100 7,030
*3 COP W/W 1.73 1.82 2.00
Power supply Phase, Cycle, Voltage 1phase, 60Hz, 208/230V
Breaker size A 30 40
Voltage Indoor - Outdoor S1-S2 AC208/230V
Indoor - Outdoor S2-S3 DC24V
Indoor - Remote Controller DC12V
Indoor unit MCA A 2.73 3.30 3.50
MOCP A 15
Fan motor F.L.A. 2.18 2.64 2.80
Fan motor output W 121 244
Air ow DRY(Lo-Mid-Hi) CMM 17.5-21.0-25.0 24.0-29.0-34.0 29.5-35.5-42.0
Air ow WET(Lo-Mid-Hi) CMM 16.5-20.0-24.0 23.0-28.0-33.0 28.5-34.5-41.0
Air ow DRY(Lo-Mid-Hi) CFM 618-742-883 847-1,024-1,201 1,042-1,254-1,483
Air ow WET(Lo-Mid-Hi) CFM 578-702-843 807-984-1,161 1,002-1,214-1,443
External pressure in.WG [Pa] [35/50/70/100/150]
Sound level
(Lo-Mid-Hi)
dB(A) 30-34-39 33-38-42 36-40-44
External nish Galvanized
Dimension Unit W: mm [inch] 1,100[43-5/16] 1,400[55-1/8]
D: mm [inch] 732[28-7/8]
H: mm [inch] 250[9-7/8]
Weight Unit kg[lbs] 31 [69] 39 [86] 41 [91]
Field drain pipe size O.D. mm[inch] 32[1-1/4]
Remote Controller Attached in indoor unit
Outdoor unit MCA A 28 37
MOCP A 40 44
Fan motor F.L.A. 0.4 + 0.4
Fan motor output W 86 + 86
Compressor Type ANB33FJEMT ANB42FJTMT
R.L.A. 18.0 19.0
L.R.A. 27.5 28.0
Air ow CMM [CFM] 100 [3,530] 94 [3,320]
Refrigerant Control Electronic Expansion Valve
Defrost Method Reverse cycle
Sound level at cooling dB(A) 52 49
Sound level at heating dB(A) 53 51
External nish Munsell 3Y 7.8/1.1
Dimension Unit W: mm [inch] 950 [37-3/8] 1,050 [41-6/16]
D: mm [inch] 300+30 [13 + 1-3/16]
H: mm [inch] 1,350 [53-1/8] 1,338 [52-11/16]
Weight Unit kg[lbs] 120 [265] 130 [287]
Refrigerant Type R410A
Charge kg [lbs,oz] 5.5 [12lbs 2oz] 6.0 [13lbs 4oz]
Oil L [oz] 1.4(FV50S) [45] 1.7(FVC68D) [54]
Refrigerant pipe
size
Gas side O.D. mm [inch] 15.88 [5/8]
Liquid side O.D. mm [inch] 9.52 [3/8]
Refrigerant pipe
length
Height difference IU-OU Max. 30m [Max.100ft]
Length Max. 75m [Max.245ft]
Refrigerant Piping Not Supplied
Connection Method Flared