Engineering Manual

Never place your hand inside the filter box during maintenance. If the filter tabs become caught when

the filter is removed for maintenance, use a long stick or similar item to remove the remaining filter.

. CAUTION

2. Installation that allows for maintenance from the bottom

(1) Remove the under panel from the filter box. (Fig. 3-2-1)

(2) Insert the filter that was removed in step 3-1 above through the

bottom of the filter box. (Fig. 3-2-2)

(3) Insert the filter between the insulators on the top plate of the filter

box until the filter is completely inside the filter box, and place the

filter on the under frame of the filter box. (Fig. 3-2-3)

(4) Install the under panel.

The last step of the procedure is to make sure that nothing

has been overlooked during the procedure. In addition, once

the filter box has been mounted and the above procedure

has been completed, carefully check for air leakage at the

connections of the indoor unit.

Final Check

For more detailed information, please consult your dealer.

Fig.3-1-3

Fig.3-2-1

Under panel

Fig.3-2-2

Filter box

Filter

Top panel of

the indoor unit

Insulator

Filter box side

Indoor unit side

Filter

Filter box under frame

Fig.3-2-3

Filter Box PAC-KE92/93/94TB-E

162