Engineering Manual

2. Install the filter box on the indoor unit with the supplied screws.
(Fig. 2-2)
PAC-KE92/93TB-E
PAC-KE94TB-E
············· 12 pcs.
········ 10 pcs.
Note) Failure to firmly tightened the screws will cause air leak-
age. Make sure the screws are firmly tightened.
3. Install the supplied suction flange on the filter box with the sup-
plied screws. (Fig. 2-3)
PAC-KE94TB-E
············· 16 pcs.
Filter box
Indoor unit
Fig.2-2
Filter box
Fig.2-3
Suction flange
Fig.3-1-1
Filter box
Side panel
1. Installation that allows for maintenance from the side
(1) Remove the side panel from the filter box. (Fig. 3-1-1)
(2) Insert the filter that was removed in step 2-1 above along the
top and bottom rails. (Fig. 3-1-2)
When using the PAC-KE93 or 94TB model, join the two
filters before inserting them. (Fig. 3-1-3)
3 Installing the filter
Fig.3-1-2
Rail
Rail
If the two filters are inserted without them being joined
together, it will render the one in the back difficult to remove.
PAC-KE92/93TB-E
········ 12 pcs.
Filter Box PAC-KE92/93/94TB-E
161