Specifications

96
ON/OFF
TEMP
FAN
VANE
MODE
CHECK
LOUVER
TEST RUN
AUTO STOP
AUTO START
h
min
RESET
SET
CLOCK
MODEL SELECT
Model No.
Temperature
button
SET button
Procedure
1. Press the SET button using a pointed implement.
"MODEL SELECT" flashes and the currently set
model No. appears (steadily-lit).
2. Press the temperature buttons to select the
model No. to set.
3. Press the SET button using a pointed implement.
"MODEL SELECT" and the set model No. appear
(steadily-lit) for 3 seconds, then disappear.
•When setting a model No., make sure it is the correct
model No. for the unit's functions. If an incorrect model
No. is set, the unit's operation will not correspond with
the remote controller's display.
Setting model No.
•By setting the wireless remote controller model No., you can change the functions that the remote controller
provides. Change the model No. as needed.
PLH–P·KAH / PLA-P·KA
PLH–P·AAH / PLA-P·AA
PCH–P·GAH / PCA-P·GA
PKH–P·GALH / PKA-P·GAL
PKH–P·FALH / PKA-P·FAL
PLA-P·KA
PLA-P·AA
PCA-P·GA
PKA-P·GAL
PKA-P·FAL
001
003
033
035
Heat pump
Cooling only
Type Model No. Model
OCT03-E-4.qxp 04.3.26 1:52 PM Page 96