Specifications

85
SW2 setting
1
ON
23456
Display detail
Explanation for display
Unit
Capacity setting display
Display as an outdoor
capacity code
Code
display
1
ON
23456
1
ON
23456
Outdoor unit setting advice
Indoor unit piping temperature / LIQUID
(TH2)
Indoor 1
– 39~88
Code
display
:
– 39~88
(When the temperature is 0: or less, “–” and
temperature are displayed by turns.)
1
ON
23456
1
ON
23456
Indoor room temperature (TH1)
8~39
Capacity
P1
P1.6
P2
P2.5
P3
P4
P5
P6
Code
6
9
10
11
14
20
25
28
Setting details
● The tens digit (Total display for applied setting)
● The units digit
H·P / Cooling only
Single phase / Three phase
Display details
0 : H·P 1 : Cooling only
0 :
Single phase 2 : Three phase
Setting details
Defrosting switch
Display details
0 : Normal 1 : High humidity region
(Example) When switching cooing and heat pump,
three phase, defrosting (normal)
“20”
1
ON
23456
1
ON
23456
Indoor unit piping temperature / LIQUID
(TH2)
Indoor 2
– 39~88
– 39~88
(When the temperature is 0: or less, “–” and
temperature are displayed by turns.)
When no indoor unit, “00” is displayed.
:
– 39~88
(When the temperature is 0: or less, “–” and
temperature are displayed by turns.)
When no indoor unit, “00” is displayed.
– 39~88
(When the temperature is 0: or less, “–” and
temperature are displayed by turns)
When no indoor unit, “00” is displayed.
:
:
:
8~39
Indoor unit piping temperature / LIQUID
(TH2)
Indoor 3
– 39~88
Indoor unit piping temperature / LIQUID
(TH2)
Indoor 4
– 39~88
OCT03-E-3.qxp 04.3.26 1:50 PM Page 85