PCAA24KA7 Specs

ManualsBrandsMitsubishi ManualsCooling24k BTU - P-Series Ceiling Suspended Unit - For Multi or Single-Zone

Table Of Contents

Job Name:

System Reference: Date:

Indoor Unit:

PCA-A24KA7

Outdoor Unit:

□ PUY-A24NHA7

□ PUY-A24NHA7-BS

INDOOR UNIT FEATURES

• Airflow settings for high and low ceiling applications

• Knock-out for outside-air intake

• Optional i-see Sensor

for air distribution and energy saving

• Auto fan speed mode

• Filter status indicator

• Easy-to-clean, washable filter

• Suspends from ceiling for quick and easy installation

• Ideal for larger retail stores, classrooms, and restaurants

OUTDOOR UNIT FEATURES

• Variable speed INVERTER-driven compressor

• Power receiver pre-charged with refrigerant volume for piping length up to 100 ft (70 ft. for A12/18/24/30)

• Low ambient cooling down to -40ºF providing 100% capacity (only for PUY models with wind baffles installed)

• 24-hour continuous operation (cooling mode)

• High pressure protection

• Fast restarts in cooling mode (15 seconds for 12/18/36/42; 50 seconds for 24/30)

• Superior energy and operational efficiency

SUBMITTAL DATA: PCA-A24KA7 & PUY-A24NHA7(-BS)

24,000 BTU/H CEILING-SUSPENDED AIR-CONDITIONING SYSTEM

P-SERIES

Summary of content (8 pages)

PAGE 1
P-SERIES SUBMITTAL DATA: PCA-A24KA7 & PUY-A24NHA7(-BS) 24,000 BTU/H CEILING-SUSPENDED AIR-CONDITIONING SYSTEM Job Name: System Reference: Indoor Unit: PCA-A24KA7 Date: Outdoor Unit: □ PUY-A24NHA7 □ PUY-A24NHA7-BS INDOOR UNIT FEATURES • Airflow settings for high and low ceiling applications • Knock-out for outside-air intake • Optional i-see SensorTM for air distribution and energy saving • Auto fan speed mode • Filter status indicator • Easy-to-clean, washable filter • Suspends from ceiling for quick an
PAGE 2
SPECIFICATIONS: PCA-A24KA7 & PUY-A24NHA7(-BS) Indoor Unit Model Number Cooling1 PCA-A24KA7 PUY-A24NHA7 Outdoor Unit PUY-A24NHA7-BS Maximum Capacity Btu/h 24,000 Rated Capacity Btu/h 24,000 Minimum Capacity Btu/h 10,000 Maximum Power Input W 1,960 Rated Power Input W 1,960 Moisture Removal Pints/h 5.80 Sensible Heat Factor Power Factor Efficiency 0.73 % SEER 21.20 EER1 12.
PAGE 3
SPECIFICATIONS: PCA-A24KA7 & PUY-A24NHA7(-BS) Indoor Unit Model Number PCA-A24KA7 PUY-A24NHA7 Outdoor Unit PUY-A24NHA7-BS MCA A 19 MOCP A 26 Fan Motor Full Load Amperage A 0.
PAGE 4
SPECIFICATIONS: PCA-A24KA7 & PUY-A24NHA7(-BS) Notes AHRI Rated Conditions (Rated data is determined at a fixed compressor speed) 1Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB *Wind baffles required to operate below 23F DB in cooling mode. For PUY models, wind baffles can be utilized to extend the cooling operation range to -40F. Please refer to the wind baffle submittals to determine which baffles are required to meet the desired operation range.
PAGE 5
ACCESSORIES: PCA-A24KA7 High Efficiency (MERV 8) Filter Element □ PAC-SE81KF-E High-efficiency Filter Element □ PAC-SH89KF-E Signal Receiver □ PAR-SA9CA-E Wireless Remote Controller □ PAR-FL32MA-E Wireless Remote Receiver □ PAR-FA32MA-E Controller Kit (Sender & Receiver) □ PAR-SL93B-E Controller Kit with i-see Sensor □ PAR-SA92MW-E Backlit, Wall-mounted, Wireless Controller □ MHK1 Portable Central Controller □ MCCH1 Wired MA Controller □ PAR-33MAA Simple MA Controller □ PAC-YT53CRAU To
PAGE 6
ACCESSORIES: PUY-A24NHA7(-BS) Twinning Distribution Pipe (50:50) □ MSDD-50TR-E Air Outlet Guide □ PAC-SG59SG-E Front Wind Baffle □ WB-PA5 Side Advanced Wind Baffle □ WB-SD5 Rear Advanced Wind Baffle □ WB-RE5 Drain Socket □ PAC-SG61DS-E Centralized Drain Pan □ PAC-SG64DP-E M-NET Converter □ PAC-SF83MA-E M-NET Converter □ PAC-SJ95MA-E Control/Service Tool □ PAC-SK52ST Hail Guard □ HG-A6 Condensing Unit Mounting Pad 24" x 42" x 3" □ ULTRILITE2 Outdoor Unit Stand—12" High □ QSMS1201M O
PAGE 7
DIMENSIONS: PCA-A24KA7 & PUY-A24NHA7 (-BS) PCA-A24KA7 Unit: inch (mm) 3-1/8(80) 11/16(18) 5-7/8(150) 15-1/4(387) 18-1/8(461) When electrical box is pulled down 2-7/16(62) 8 6 26-3/4(680) 1-1/2(38) 5-1/2(140) 12-5/8(320) ) 6(Φ 12 5 11/16(18) 48-11/16(1237) (Suspension bolt pitch) 7-1/12(190) 1/16(1) 3(76) 5-7/16(138) 4-3/4(121) 2 1/16(2) Φ4 -15 /1 2-15/16(75) 3-3/8(86) 120° Ceiling 4-7/8(124) 3 4-15/16(126) 4 10-1/4(260) 3-3/8(85) 7-1/2(190) 1-13/16(46) 1 5 1-7/16(37)
PAGE 8
DIMENSIONS: PCA-A24KA7 & PUY-A24NHA7 (-BS) 2-U Shaped notched holes (Foundfation Bolt M10) 175 <6-7/8> 19<3/4> 330 <13> Air Discharge 61<2-13/32> 40<19/32> 0 53<2-3/32> 70 <2-3/4> 57<2-1/4> 41 <1-5/8> 2-12×36 oval holes (Foundation Bolt M10) Min. Min.100mm <3-15/16> FOUNDATION 25 <31/32> 500 <19-11/16> Side Air Intake Max. 500 <19-11/16> Min. 175<6-7/8> Rear Air Intake Side Air Intake Handle for moving Terminal Connections Left ... Power supply wiring Reight ...