Installation manual

Basic operations
Operation mode icons
: Cool : Dry : Auto
: Heat : Auto_Cool : Auto_Heat
Turning on and selecting operation mode
1
Touch the 1 [ON/OFF] button.
2
Touch the 2 [Operation mode] button to go through the operation modes.
Cool Dry
*1
Auto
*1*2
Heat
*1
*
mode.
Set temperature
Touch the 5 or 6 button to decrease or increase the set temperature.
the display format setting on the remote controller.
Operation mode Set temperature range
*1
Heat
*1
Auto (single set point)
*1*2
Auto (dual set points) Cool: Same as the set temperature range for Cool mode
Heat: Same as the set temperature range for Heat mode
*2*3*4
Not settable
Auto mode (dual set points).
<Cool, Dry, Auto (single set point), Heat> <Auto (dual set points)>
Set temperature
Cooling set temperature
Heating set temperature
Instruction Book.
12