English Français CITY MULTI Control System Smart ME Controller PAR-U02MEDA Simple Operation Manual Español Italiano Português Türkçe Hrvatski Prior to use, thoroughly read the instructions in this manual to use the product correctly. Retain this manual for future reference. Make sure that the CD-ROM, this manual, and Installation Manual are passed on to any future users.
Contents Safety precautions ..................................................4 Names and functions of controller components ......7 Controller interface ..................................................................7 Screen configuration ...............................................................8 Display ...................................................................................10 Basic operations ...................................................12 Troubleshooting ......................
Safety precautions WARNING Indicates a risk of death or serious injury. CAUTION Indicates a risk of serious injury or structural damage. General precautions WARNING To reduce the risk of injury or electric shock, before spraying a chemical around the controller, are used frequently. These substances can compromise the performance of the unit or cause can result in electric shock, malfunctions, smoke, or fire.
Safety precautions CAUTION To reduce the risk of fire or explosion, do not place flammable materials or use flammable sprays around the controller. To reduce the risk of electric shock or To reduce the risk of damage to the controller, do not directly spray insecticide or other flammable sprays on the controller. To reduce the risk of injury and electric shock, pointy or sharp object. consult an authorized agency for proper disposal of remote controller.
Safety precautions The CD-ROM that is supplied with Smart ME Controller WARNING or speakers. Book. ® Reader® or Adobe® Acrobat® installed. “Adobe® Reader®” and “Adobe® Acrobat®” are registered trademarks of Adobe Systems Incorporated.
Names and functions of controller components Controller interface Occupancy Sensor control. Brightness Sensor The brightness sensor detects the brightness of the room for Temperature & Humidity Sensor humidity. LED Indicator The LED indicator indicates the operation status in different colors. The LED indicator lights up during normal operation, lights off Touch panel & Backlit LCD When the backlight is off, touching the panel turns the time.
Names and functions of controller components Screen configuration General equipment screen Home screen (AHC) are connected.
Names and functions of controller components Indoor unit setting screen appear on the display. Humidity setting screen (AHC) are connected.
Names and functions of controller components Display Home screen Basic * All icons are displayed for explanation. cd 8 1 [ON/OFF] button c 2 [Operation mode] button Touch to change the operation mode. performed. The icon prohibited. 3 [Menu] button d 4 e b f h g i 9 6 0 7 a Touch to bring up the Menu screen. 4 LED Indicator ON/OFF button e 5 Touch to decrease the set temperature. 5 f 6 Touch to increase the set temperature. occupant.
Names and functions of controller components j k l Auto-OFF display n o m m l n j o k Touch to go to the General equipment screen. General equipment screen v AHC input/output status appear. v w Touch to go to the Home screen. x Touch to go through the General equipment screen pages. w x Humidity setting screen y Touch to decrease the set humidity. (20%–80% (RH)) z y Touch to increase the set humidity. (20%–80% (RH)) A Touch to go to the Indoor unit setting screen.
Basic operations Operation mode icons : Cool : Dry : Heat : Auto : Auto_Cool : Auto_Heat Turning on and selecting operation mode 1 Touch the 1 [ON/OFF] button. 2 Touch the 2 [Operation mode] button to go through the operation modes. Cool Dry Auto Heat *1 *1*2 *1 * mode. Set temperature Touch the 5 or 6 button to decrease or increase the set temperature. the display format setting on the remote controller.
Basic operations Fan speed 1 2 Touch the button labeled 7 to display the Indoor unit setting screen. Touch the button labeled p to go through the fan speeds. p 7 Auto the heating mode the operation mode) Air direction 1 2 Touch the button labeled 7 to display the Indoor unit setting screen. Touch the button labeled r to change the air direction. r 7 * The settable air directions depend on the indoor unit model.
Basic operations Automatic cooling/heating operation 1 Touch the 1 [ON/OFF] button. 2 Touch the 2 [Operation mode] button to display the “Auto” mode. displayed in the area labeled 2. Refer to the Installation Manual for details about initial settings. LOSSNAY unit (ventilator) operation Touch the 1 [ON/OFF] button to turn both the indoor unit and the LOSSNAY unit on. 1 2 Touch the button labeled 7 to display the Indoor unit setting screen.
Troubleshooting When an error occurs, the [Error information] Check the error status, stop the operation, and consult your dealer. Error code, error unit, MNET address, and your dealer’s phone number registered. The indicator blinks in the color it is illuminated in at the time. dotted line) on the Home screen. To reset the error, touch the 1 [ON/OFF] button.
Timer, Schedule, and Auto return The settings for Timer, Schedule, and Auto return can be made. Touch the 3 [Menu] button to go to the Menu screen, and select the desired setting item. Refer to the remote controller Instruction Book for further information. Timer Schedule Up to eight operation patterns can be scheduled for each day.
Maintenance Filter information indoor units. Resetting the filter sign 1 Select [Filter information] from the Menu screen. 2 Touch [Reset] to reset the filter sign. 3 Touch [OK]. 4 A confirmation screen is due for cleaning.
Product features Energy-save control with the use of the built-in occupancy sensor Occupancy sensor Brightness sensor Non-use – Set temperature offset Thermo-off (Example: While the occupants are sleeping at night) 18
Product features LED Indicator The LED indicator indicates the operation status by lighting and off. Green, Lime, and White LED Indicator Operation status LED indicator The unit is in operation. Lights up in different colors according to the operation mode or the room temperature *1 The unit is stopped. Turns off. An error is occurring. Blinks in the color it is illuminated in at the time. Lights up in the predetermined color. *1 performed. The occupancy sensor has sensed an occupant.
This product is designed and intended for use in the residential, HEAD OFFICE: Authorized representative in EU:
