Installation manual

57
Function settings
3
The default setting for [Basic display mode] is
“Mode.”
Touch the button to select the Basic display mode
from “Mode,” “Room temp.,” or “Non-use.”
Setting items common to “Mode” and “Room
temp.”
• Brightness
* Select “High” or “Low.”
* This setting is effective only when the “With
Brightness Sensor” setting (explained on the next
page) is disabled.
• Color during energy saving (2nd page)
* Select the desired color to be used during energy-
save control.
• Occupancy detection indicator (2nd page)
* Select “Enabled” or “Disabled.”
When “Enabled” is selected, the LED indicator blinks
once every 30 seconds when the occupancy sensor
detects occupancy.
Setting item specific to “Mode”
• Mode color (3rd and 4th pages)
* Select the desired LED color for each operation
mode.
Setting item specific to “Room temp.”
• Room temp. range and LED color (3rd page)
* Set the desired temperature ranges and the LED
colors for low, medium, and high temperature range
groups.
Touch [Done] to save the settings.
Navigating through the screens
• To return to the Menu screen: [Menu] button
• To return to the previous screen: [Back] button