Unit installation

4
@
. New Functions
@
. New Functions
Function Description
Available when
connect
Go to
page
PUHZ
series
PU(H)
SUZ
MXZ
series
Easy maintenance
function
Displays information necessary for maintenance.
Below information for easy maintenance of air-conditioner can be
displayed.
• Compressor •
Accumulated operating time
• Number of ON/OFF times
• Operating current (A)
• Outdoor unit • Heat exchanger temperature (°C)
• Discharge temperature (°C)
• Outside air temperature (°C)
• Indoor unit • Intake air temperature (°C)
• Heat exchanger temperature (°C)
• Filter operating time (hours)
The operation state of inverter models can be monitored using the
maintenance stable-operation control (fixed frequency)
○
×
6
Operation data monitor function
Information necessary for maintenance can be displayed on the
remote controller.
48
Error code monitor function
Error code is displayed in the service inspection monitor.
○ ○
44
Contact number display
Displays the contact telephone number to be called when an error
occurs.
○ ○
33
Multi language display
In addition to English, contents can be displayed in 7 other lan-
guages.
• English,
German, Spanish, Russian,
Italian, Chinese, French, Japanese
○ ○
12
Temperature display (°C/°F) setting
Enables you to set the unit (°C/°F) in which temperatures are to
be displayed.
○ ○
35
Room temperature display setting
Enables you to set whether to show or hide the indoor (room)
temperature.
○ ○
36
Auto heat/cool display setting
Enables you to set whether to display or hide “COOL”/“HEAT” in
auto mode.
○ ○
37
Weekly schedule timer
Provides a built-in weekly timer that allows you to make on/off and
temperature settings.
Up to 8 patterns can be set for each day of the week.
○ ○
23
"Operation limit function setting
(Operation lock)"
Lets you disable all the buttons or all the buttons except for the
[ON/OFF] button, preventing mischief and incorrect operations.
○ ○
14
Temperature range limit function
Enables you to establish upper and lower limits for the tempera-
ture setting. This prevents overcooling or overheating, thereby
contributing to energy saving.
○ ○
18
Clock function setting
Enables you to set whether to use the clock function.
○ ○
21
Auto off timer
Stops operation when the preset time elapses following the start
of operation.
The time can be set from 30 minutes to 4 hours in 30-minute in
-
crements.
By default,
the weekly timer is selected.
To switch to the auto off timer, select it using the remote
controller’s function selection.
○ ○
26
Simple timer
Enables you to set on/off settings in 1-hour increments within 72
hours.
○ ○
29
Remote controller main/sub setting
Enables you to set the remote controller as the main or sub.
○ ○
20