Unit installation

37

Display example
(1)
(2)
(3)
(4)
(5)
(1) While pressing the
MODE
button, press the
ON/OFF
button for 2 seconds to activate the remote controller’s func-
tion selection mode.
(2) Press the
MODE
button until appears on the screen (at ).
[Display
]
(3) Press the
MENU
button so that “AUTO MODE DISP C/H” appears on the screen (at ).
(4) Press the
ON/OFF
button to select “on” or “oFF” on the screen (at ).
[Display
]
(5) While pressing the
MODE
button, press the
ON/OFF
button for 2 seconds to return to normal mode.
* If you press the
ON/OFF
button before the
MODE
button, the settings you have made will be cancelled.

Display example when “AUTO MODE DISP C/H” is set to “ON”
[During auto (cool) mode]
[During auto (heat) mode]

Display example when “AUTO MODE DISP C/H” is set to “OFF”
4.4.3 Automatic Cooling/Heating Display Setting
• This section explains how to set whether to display “COOL”/ “HEAT” in auto mode. It will not be displayed if auto mode is set
to OFF.
1
ON
(default) : One of “Automatic cooling” and “Automatic heating” is displayed under the automatic mode is displayed.
2
OFF : Only
“Automatic” is displayed under the automatic mode.
Selecting Whether to Display “COOL”/“HEAT” in Auto Mode
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING