Unit installation

33
4.3.3 Contact Number Setting for Error Situation
The following settings can be made.
1
CALL • OFF (default) : The preset contact number is not displayed even when an error occurs.
2
CALL •
************ : The preset contact number is displayed when an error occurs. (The contact number can consist of up
to 12 digits.)
CALL • – : The contact number is not set in default setting. It is displayed.
Setting the Contact Numbers
(1) While pressing the
MODE
button, press the
ON/OFF
button for 2 seconds to activate the remote controller’s func-
tion selection mode.
(2) Press the
MODE
button until appears on the screen (at ).
[Display
]
(3) Press the
MENU
button until “CALL” appears on the screen (at ).
[Display
]
(4) Press the
ON/OFF
button to select whether or not to show the contact number.
Do not show Show
[Display ]
[Display
]
(5) Press the
buttons ( and ) to set the desired contact number, one digit at a time. To move the input
digit position left or right, press the [TEMP] buttons (
and ).
[Display
]
The contact number can contain up to 12 digits.
[When entering “012”]
[Display
] CALL • 012_
“0” → Press the
button ( ) once.
Each time a value is entered, press the [TEMP] button (
) to move the cursor to the next digit to the right.
“1” → Press the
button ( ) twice.
“2” → Press the
button ( ) 3 times.

Display example
(1)
(2)
(3)
(4)
(5)
(6)
(5)
(7)
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
TIMER CONTROLLER CLOCK
CALL
.
CALL
.
CALL
.
0 1 9
Space