Unit installation

30
Make sure that “SIMPLE TIMER” is displayed on the screen (at ).
(1) Press the
MENU
button to select on the screen (at ).
[Display
]
(2) Press the
button to select “Start time only” or “Stop time only”.
• Start time only (Displays the time at which the air conditioner starts) : “Hr AFTER ON”
• Stop time only (Displays the time at which the air conditioner stops) : “Hr AFTER OFF”
(3) Press the
buttons ( and ) to set the desired time. (The time can be set up to 72 hours in 1-hour
increments.)
[Display
]
* To cancel the time you have set, press the (CLEAR) button.
(4) Press the
FILTER
( )
button to confirm the setting
*1. When using only the start timer or stop timer, make sure that “– –” is displayed for the timer you are not going to use.
*2. To cancel the time you have set, press the
(CLEAR) button to display “– –”, and then press the
FILTER
( )
button to conrm it.
(5) When
using both the start and stop timers, carry out steps (2) to (4) to set both the start and stop times.
* It is not possible to set the same time for both the start and stop times.
(6) Press the
MODE
button to complete the setting procedure.
[Set display example]
(7)Press the
ON/OFF
button. The simple timer will start to operate and the timer execution time you have set will be
displayed.

Display example
(7)
(6)
(1)
(3)
(2)
(4)
How to Set the Simple Timer
If both start and stop timers are set, whichever time will come first will be displayed
Hr
AFTER
ON
Ten hours
SIMPLE
[Display ] [Display ]
TIMER
MONITOR
TIMER SET
:ENTER
Hr
AFTER
ON Hr
AFTER OFF
1 2 71 72