Unit installation

20

Display example
(1)
(2)
(3)
(4)
(5)
4.3 Basic Functions Setting
4.3.1 Remote Controller Main/Sub Setting
When using 2 remote controllers, they must be designated as the main and sub remote controllers.
The following settings can be made.
1
MAIN (default)
: The remote controller is set as the main controller.
2
SUB : The
remote controller is set as the sub controller.
To Change the Main/Sub Setting
(1) While pressing the
MODE
button, press the
ON/OFF
button for 2 seconds to activate the remote controller’s func-
tion selection mode.
(2) Press the
MODE
button until
MODE
SELECTION
appears on the screen (at ).
[Display
]
(3) Press the
MENU
button to select “CONTROLLER” on the screen (at ).
(4) Press the
ON/OFF
button to select “CONTROLLER MAIN” or “CONTROLLER SUB” on the screen (at ).
[Display
]
(5) While pressing the
MODE
button, press the
ON/OFF
button for 2 seconds to return to normal mode.
CHANGE
LANGUAGE
FUNCTION
SELECTION
MODE
SELECTION
DISP MODE
SETTING
CONTROLLER
MAIN
CONTROLLER
SUB